Blast furnace freezer failure: it can automatically start within one minute, within a period of time, and within a few minutes. The probability of a single machine is too low to achieve the cooling effect. Analysis and maintenance of the failure of the blast furnace freezer: the temperature of the freezer freezer is insufficient, and the freezer temperature exceeds 10, indicating that the thermostat has the ability to adjust the temperature.
However, even if the temperature adjustment knob of the freezer is adjusted, the cooling effect cannot be achieved unless it is placed in the normally open position. The heat-sensing tube probe is not stuck in the specified position, but hung behind the condenser panel, close to the condenser tube. Therefore, the temperature sensing tube probe quickly senses the low temperature every time it is started and commands the shutdown. Move the temperature sensing tube probe to the specified position on the outer panel of the condenser, and the freezer will return to normal.
