Newly purchased or moved display cabinets should stand for 2 to 6 hours before turning on. Before use, the empty cabinet should be energized and run for 2 to 6 hours, and it cannot be started immediately after shutdown. Wait for more than 5 minutes to avoid burning the compressor. Generally, the gear position of the thermostat of the blast furnace freezer needs to be adjusted appropriately according to the season, ambient temperature, and usage. It is more appropriate to place the thermostat at 5" or 6" in summer; in spring and autumn, the thermostat at 3" or 4" is more appropriate. When using the blast furnace freezer, the number of door openings should be minimized to shorten the time for accessing food. Hot food must be cooled to room temperature before being put into the blast furnace freezer. For the indirect air-cooled blast furnace freezer, do not keep the food too close to the air outlet.
For direct cooling type blast furnace freezer, when the frost thickness reaches 5 mm, manual defrosting is required. Routine maintenance: clean the compressor and condenser regularly. Regularly clean the blast furnace freezer at least once every 2 months. When cleaning the blast furnace freezer, cut off the power first, scrub gently with neutral detergent and water, and then dipped in clean water to wipe off the detergent.









